Assembly Of Aerotrim - Aerotrim

Go to content

Main menu

Assembly Of Aerotrim

Instructions

Here is a PDF document of assembly instructions.

Step 1.

The worktop represents the inside of your Aerotrim.

1. Place the two baseplates without tape on a worktop.

2. Insert the bolt through the [long link] -[ top connector baseplate left] - [long link], and finger tight the nut.

3. Do the same with the [top connector baseplate right]

4. Insert the bolt through the [short link] -[ bottom connector baseplate left] - [short link], and finger tight the nut.

3. Do the same with the [bottom connector baseplate right]

Aerotrim step 1

Step 2.

1. Place the two baseplates with tape above the partial built link unit.

2. Insert the bolt through the [long link] -[ bottom connector baseplate_with_tape left] - [long link], and finger tight the nut.

Make sure that the nut is on the inside, which will help when you have to fasten the bolts on the links.

3. Do the same with the [bottom connector baseplate_with_tape right]

Aerotrim step 2

Step 3.

Insert bolt and nut through the bottom eyelets to complete the first part of the assembly.

You can now lightly tighten the nuts to an extend that you can still move the assembly up and down.

Aerotrim step 3

Step 4.

Install a bolt through the backing plate and the Aerotrim.

This is a view from the front.

Aerotrim step 4
Aerotrim step 4b

Step 5.

Install the link assembly to your Aerotrim.

Please Note

The short link is at the bottom.

This is a view from the back.

Aerotrim step 5
 
Back to content | Back to main menu